Computer assembly

I/ Assembly procedure

• The preparation of the computer frame

1. Screw the struts on the frame. Be careful to respect the motherboard’s tracks.
2. Put the DVD burner.
3. Put the power supply with four screws.
4. Assemble the input/output panel on the pc tower.

• The preparation of the motherboard

1. Install the processor on the motherboard
2. Install the ventirad on the precessor
3. Install the two RAM modules
4. Fix the motherboard on the chassis with six screws.

• The installation of peripheral devices

1. Add the audio/video input/output of the peripheral card
2. Put the hard drive.

II/Cabling process

• Cabling

1. Connect the power supply connector on the motherboard.
2. Connect all the connectors’ tower to the motherboard (buttons, dels, fan…)
3. Connect the hard driver power supply + SATA 1.
4. Connect the DVD burner power supply + SATA 2.

III/ Equipment manipulation

• To protect the material of electrostatic discharges.

1. Place the unwrapped material on the antistatic carpet connected to the earth (ground) connector
2. Put the bracelet (connected to the carpet), it is used to evacuate the electrical charges (of the human body) to the earth.
3. Do not touch the tracks, the pastilles or the components’pins with fingers.

Albane & Enzo