I/ Assembly procedure
- The preparation of the computer frame
- Screw the struts on the frame. Be careful to respect the motherboard’s tracks.
- Put the DVD burner.
- Put the power supply with four screws.
- Assemble the input/output panel on the pc tower.
- The preparation of the motherboard
- Install the processor on the motherboard
- Install the ventirad on the precessor
- Install the two RAM modules
- Fix the motherboard on the chassis with six screws.
- The installation of peripheral devices
- Add the audio/video input/output of the peripheral card
- Put the hard drive.
II/Cabling process
- Cabling
- Connect the power supply connector on the motherboard.
- Connect all the connectors’ tower to the motherboard (buttons, dels, fan…)
- Connect the hard driver power supply + SATA 1.
- Connect the DVD burner power supply + SATA 2.
III/ Equipment manipulation
- To protect the material of electrostatic discharges.
- Place the unwrapped material on the antistatic carpet connected to the earth (ground) connector
- Put the bracelet (connected to the carpet), it is used to evacuate the electrical charges (of the human body) to the earth.
- Do not touch the tracks, the pastilles or the components’pins with fingers.
Albane & Enzo
Very informative, all components are listed perfectly.